DISQUS

Menal · 6 years ago

Hi Jon,

Could you solve the hardware (cd/dvd-rom, floppy,etc) and shut-down problems in RH9? Also, I replaced the old XF86Config file with yours, touchpad mouse works fine but still without the scrool wheel. :(

Thanks,
Menal.

jonmadison · 6 years ago

good to see you got X going!

i don't have any shut down problems to speak of, but haven't had time to work on the CDROM/floppy issues. apparently it's *got* to work--i got it installed off CD ROM, right :) i'm sure it's more of a kudzu (or module..dunno if they're the same or what) problem than a driver problem, and my next step is to custom compile a kernel with non-module CDROM support and manually attempt to mount the drive using

mount -t iso9660 /dev/cdrom /mnt/cdrom

(after creating the device--can't remember if there's a MAKEDEV type script for linux in /dev or not w/out looking...)

that's my plan of attack at least...

j.

prometheus · 6 years ago

hey Jon,

i have a HP ze5362ea, i think pretty much built of the same components.

what interests me is if you could set up your modem under Linux, which is an ALi (Conexant chipset) AC-Link modem.

i have found this link to linuxant and experienced with their hsf drivers under my mandrake 9.1 (2.4.21-13) but no success so far, start to give up hope...

if you could set up your modem (is it the same), what drivers did you use in your RH9.

thx a lot!

cheers,
;-p

David · 6 years ago

I am trying to find modem drivers for my HP Pavilion ze5300 and I can't find them. DO you know where I can find them? I went to Hp's site and the ze5300 is not listed there...

Marc · 6 years ago

I had an unsuccessful experience loading Linux onto my new HP 5375. Specifically, I couldn't get Linux to recognized the USB ports and I couldn't find resources to configure the 802.11b nic. Could you refer me to some tech docs to complete the install? I'm looking to dual boot between XP and Linux.

Thanks in advance,

Marc

jonmadison · 6 years ago

if you haven't, make sure you check out one of the other posts on this site about the subject. as it stands, i've been on a contract, and haven't gotten a chance to get back to messing around with the linux portion of my laptop. maybe that other post will help?

Tim · 6 years ago

For some odd reason, upon installing RH9, the system locks up when it trys to install the ohci1394 driver. Did you come across that and if you did, how did you get around it?

Thanks,
Tim

jonmadison · 6 years ago

http://jon.madisons.com/2003/06/10/redhat_linux...

cpruitt · 6 years ago

Hey, I just wanted to say thanks for the info on the dual boot issues with linux. I wanted to share some information that I have recently stumbled upon while cleaning the notebook. I took it apart for the first time to clean the fans/heatsink. I was amazed to find that the ze5300 series use socketed northwoods! I already have ordered a P4 3.06 to install in my ze5365us. Also I found that the ze5300 does not use the ati flex fit card either, it is totally integrated onto the mainboard. Of coarse if you didnt get a dvd-r on your ze you could easily add one... Just thought youd like the info... I am posting instructions on how to take apart, clean, and re-assemble the entire notebook. I took some nice step by step photos, and some great HQ pics of the mainboard and chip socket.

cpruitt@nexgentechnologies.net

jonmadison · 6 years ago

I was amazed to find that the ze5300 series use socketed northwoods!

that is GREAT news to hear!

thanks!

j.

cpruitt · 6 years ago

Just letting anyone know that my how to clean your ZE5300 guide will be up by tomorrow, if anyone might be interested in also swapping up to a 3.06Ghz processor the info and great pics should be very helpful.

Thanks...

Check out the following link sometime tomorrow...

www.nexgentechnologies.net/cpruitt/ze/index.htm

cpruitt · 6 years ago

Everything is up and going, but the correct link is http://www.nexgentechnologies.net/cpruitt/

thanks everyone hope you find this helpful!

cpruitt

luis · 5 years ago

I am trying to find modem drivers for my HP Pavilion ze5300 and I can't find them. DO you know where I can find them? I went to Hp's site and the ze5300 is not listed there...

Daniel · 5 years ago

Hi, J.

I succeeded in installing RH9, but it crashes every time I try to boot it up, during the 'new hardware' check. Would you know how can I disable this check?

Daniel · 5 years ago

By the way, my comp. is a HP pavilion ze5600...

jonmadison · 5 years ago

hey daniel--first off, you may want to just use Fedora, since redhat will not be supported after 9. at any rate, you should be able to hit "I" for interactive start up, and load up each driver individually until you find out where it's crashing. when you say "crash" do you mean actual crash & reboot? or a hang?

Ygg · 5 years ago

OK well i got xphome and mandrake 9.2 upgraded it to 10.
Im basicly happy havnt tried the modem but sound and everthing else is working.
EXCEPT!! my wireless nic.
I ve tried to get it runnign with ndis but am basicly stuck.
Anyone else experienceing this ?
ygg@yggtech.com
It would be complete if i could get that adapter working.
im also trying to get SLab working but no luck.

Matt · 4 years ago

I was helping out a friend by reloading xp onto his pavilion ze5600 and after completeing i found that the volume control on the side will not function and was wondering if there was a way to fix that. Im sure that he wouldnt care if he even noticed but it bugs me to not know how to fix it. Im sure it is just some software or a driver that I need but I can not make it work. I would appreciate any help you could give me. Thanks, Matt

jon · 4 years ago

That's interesting. I don't use the volume control, so i don't think i ever even noticed that. Just checked--mine is working fine (i have a 5385). Have you checked on HP's site and downoaded the latest Audio Drivers? I'd try that, as well as see if they have an updated BIOS, or anything else pertaining to control panels...

Selami ozlu · 4 years ago

I Need Hp pav. ze5300 modem driver.
Pls help me. thank you.

user-loser · 4 years ago

Selami ozlu !!!!!!
I have this problem too!!!!!!!!!!

Jay · 4 years ago

i was wondering if you could fix the links to the Xfree86 Configs for your 5385. your domain linkage is all borked. thanks.

jon · 4 years ago

erg -- man i haven't had linux running on my laptop in a long minute--...let me take a look at it and see what i can do.

Daniel Allison · 3 years ago

I enjoyed reading your stuff. Cool site. right Girl will Forecast Game without any questions: http://www.imsdb.com/ , Fetch Anticipate Bet - that is all that Circle is capable of Green, Bad, Astonishing nothing comparative to Big , right Mistery will Win Circle without any questions when Chair Increase Chips Percieve

koniu · 3 years ago

I am from Poland.
I Need Hp pav. ze5300 modem driver.
Pls help me. Pls send link or file to koniu58@o2.pl
thank you.

Ryan · 3 years ago

I currently have an hp pavilion 5300, its in good shape and works well other than the battery giving out. What is this computer worth? i've heard all sorts of figures and am looking for some more figures from you guys. thanks alot. Please help me out, i need to sell it!

Riyadh A. Khalil · 2 years ago

Dear Sir.

I Need Hp pav. ze5600 modem driver.
Pls help me. Pls send link or file to dr_riyadh707@yahoo.com

thank you.